The DocuPen RC800 has two control buttons and eight LEDs indicating the selectedscan settings.

By pushing the Power ON/OFF Resolution (Rez) button you can:

1. Turn scanner ON. The corresponding LEDs will light on, indicating the current scansettings

2. Change between High Resolution and Standard Resolution setting

3. Turn scanner OFF - The DocuPen is designed to turn itself OFF automatically. Youcan also turn it OFF manually by pushing and holding the button for 5 seconds

By pushing the Color Mode button you can switch between Mono, Docucolor(Standard Color) and Photocolor setting

You have to start the scanning operation within a few seconds after turning theDocuPen ON. If there is no manipulation, i.e. no movement or no setting-up of theScan mode, the scanner will turn itself OFF. You will need to turn it ON again.

Following on the next page you can see a detailed explanation of the different Scanmodes and the corresponding LED configurations.

Note: For optimal scan quality and memory usage we recommendscanning in Monomode in 200 dpi or 400 dpi and in Docu- and PhotocolorModes in 100 or 200 dpi.

LED Indicators

The 8 LED indicators at the top of the DocuPen from left to right indicate the following: