The DocuPen Scanner has two control buttons on top. On the left-hand side of theDocuPen you can see eight LEDs indicating the scan settings and on the right you seethe Battery and External memory card cover and the USB port. By pressing thecontrol buttons you will be able select the desired color mode and scan resolution. The LEDs on the left-hand side of the scanner will indicate the mode that you have selected.

Power On/Rez (Resolution) Button

Press the Power On/Rez button once to turn the DocuPen on. The DocuPenwill turn itself on in default or last used configuration. The corresponding LEDswill be on. For details on the various configurations please go to section ScanSettings - LEDs Indicators.

Press the Power ON/Rez button again to select between Standard Resolutionand Hi Resolution (Hi Rez) setting.There are two Standard Rez and two HiRez settings which can be set via the Pen Configurator Dialog explained inSection Scan Settings. The Resolution LEDs will turn on/off accordingly.

After the scan is completed the DocuPen will save the data into memory andturn itself off automatically. You can also turn the DocuPen off manually bypressing and holding the Power ON/Rez button for 5 seconds.

Color Mode Button

Press the Color Mode button to select desired Color mode.There are 3 colormodes available: Monocolor, Docucolor* and Photocolor . The Color ModeLEDs will turn on/off accordingly. When the desired Color mode and Rez settingare selected, you can start gliding the DocuPen over your document.

Note: YOU MUST INSTALL THE DRIVERS BEFORE STARTING TO WORK WITHTHE DOCUPEN!

*Docucolor is the term referring to standard color